|
Pipestar International, Inc.
Polyethylene Pipe Fittings and Sweep Bends Manufactured in Canada for Gas, Water, Mining, Industrial and Plumbing applications:
- Pipestar offers a range of seamless long radius ARC™ HDPE sweep bends made to the highest quality standards.
- Pipestar offers a range of seamless, HDPE ARC™ Bends produced through a unique patented manufacturing process.
- The name ARC™ comes from the word ARChetype which means "original pattern or model of which all things of the same
type are representations or copies".
- ARC™ sweep bends are hot forged from polyethylene PE 3408 pressure pipes and are
available in IPS and DIOD sizes 2" through to 14".
- No Mitred Fusion Joints - Seamless smooth interior - Virtually no flow restriction
- Fully pressure rated
- Wearability increased in slurry lines
- Can manufacture any angles up to 90º
- Suitable for butt-welding, electrofusion or flanging
- No reversion
- ARC™ Bends Manufactured to:
Angular tolerance of +/- 2° without reversion Linear tolerance of +/- 3/4" (+/-20 mm)
Center line of curvature generally 3 times the pipe diameter (HDPE Industry Nomenclature 6D)
| |
ARC™ Bends
LS30
LS45
LS60
LS90
PE Foot Valves
Foot Valve
ARC™ Analysis
Specifications
Applications
|
