|
BELL PLATE VALVE BOXES
- The slip-type design protects the service from downward pressure. The
box absorbs the pressure from above.
- Meets DOT requirement 192.181; "If the valve is installed in a
buried box, the box must be installed so as to avoid transmitting external loads to the
main."
- Valve Box sits on dirt, not the valve.
- Easily adjusts to grade level. No need to dig when grade
changes. Just push down or pry up.
- A full throat/unobstructed upper tube, allows more room to operate the
key.
- Made from SUPERIOR GRADE ABS plastic. It's long lasting and won't rust, rot or corrode.
- The boxes have a 4" or 6" upper tube and a
6" or 9" bell area.
- See "How to Order Bell Plate Valve
Boxes" for a list of valves that these valve boxes will fit.
- 1½" cast iron flange is STANDARD for
off-road
installations.
- 5" cast iron heavy duty flange is standard for
in-road installations.
- Choose from locking or non-locking lids marked GAS, WATER or SEWER.
- Lids are available with or without vent holes.
- Extensions are available.
- Customized lids are available for an additional charge.
- Light weight and easy to handle.
- 1½" stackable risers, that utilize
the same lid, are available when the road is repaved.
Literature (PDF)
|
|
