6 INCH VALVE BOX WITH 12 INCH BELL
- The slip-type design protects the service from downward pressure. The
box absorbs the pressure from above.
- Meets DOT requirement 192.181; "If the valve is installed in a
buried box, the box must be installed so as to avoid transmitting external loads to the
main."
- Easily adjusts to grade level. No need to dig when grade changes, just
step-on it to push down, or pry it up.
- A full throat/unobstructed upper tube, allows more room to operate the
key.
- Made from SUPERIOR GRADE ABS plastic. It's long lasting and won't rust, rot or corrode.
- Light weight and easy to handle.
- 6" I.D. upper tube with a 12" I.D. bell.
- Fits 6" plastic valves. The closed bell gives flexibility for use
on many steel valves.
- 1 ½" cast iron flange is standard for off-road installations.
- 5" Cast iron heavy-duty flange is available for in-road
installations.
- Choose from locking or drop-in lids marked GAS, WATER, or SEWER.
- Lids are available with or without vent holes.
- Various arch sizes available.
- 1 ½" stackable risers, that utilize the same lid, are available
when the road is repaved.
- Extensions available.
- Tracer wire holes can be provided upon request.
- Customized lids are available for an additional charge.
- Use with a Handley valve support for the ideal installation.
Literature (PDF)
|
