BROEN offers two kinds of manual gear operators... horizontal gear and vertical gear. The standard horizontal gear operator places the gear drive shaft on a plane that is perpendiclar to the valve stem, whereas the vertical gear operator places the gear drive shaft on a plane that is parallel to the valve stem. Typically, the standard horizontal gear operator is utilized, but when certain conditions and circumstances demand vertical operation, such as direct burial of the valve, the vertical gear operator is often specified.
	Horizontal Gear Operators
	TYPE Reduction Weight (lbs.) A B C E G H BWG-02-10 1/50 57 8.94 8.27 4.80 7.68 19.69 4.33 BWG-03-10 1/100 87 10.59 9.45 5.87 11.46 23.62 5.28 BWG-04-10 1/186 152 13.94 13.19 7.36 13.66 27.56 5.79 BWG-05-10 1/244 265 16.14 15.98 8.27 15.04 35.43 6.69 Vertical Gear Operators
	TYPE Reduction Weight (lbs.) A B C E G H BWG-02-20 1/182 57 8.94 8.27 4.80 5.61 19.69 4.33 BWG-03-20 1/160 87 10.59 9.45 5.87 6.50 23.62 5.28 BWG-04-20 1/190 152 13.94 13.19 7.36 7.42 27.56 5.79 BWG-05-20 1/298 265 16.14 15.98 8.27 8.35 35.43 6.69

Home  ¦   Manufacturers   ¦  Rental Equipment   ¦  Close-Out/Excess Inventory   ¦  Contacts   ¦  Site Map